Mist-ified Portable Water Misting Systems
(water misters) have been developed with simplicity
and portability in mind. The Water Misting System
consists of a manually pressurized water tank that
will send filtered water to the misting nozzle(s)
which create a fine mist of very small water droplets.
The main purpose for developing
this system is PORTABILITY. When a mist is not called for, turn the valve to the off position to
conserve the water in your tank. (Note: when
not driving Golf Cart , turn ball valve to off position
to conserve water)
Each nozzle will emit 1/2 gallon per
hour at max. pressure (40 psi). A (2) nozzle system
will consume one gallon of water per hour of continuous
operation.
Based on 1/2 gallon per hour per nozzle,
multiply the number of nozzles in your system by .5
and then divide that number by tank capacity for an
estimated time of continuous use.
The system parallels the technology
of evaporative cooling. The portability aspect of
the system allows the misting system (water mister)
to easily attach to a portable shade canopies (EZ-Up
or similar),Golf Carts, RV awnings, Baseball &
Softball Dugouts, Horse Trailers, Open air tractors
and mowers, etc.
Mist-ified products are designed to install
and remove in just minutes and requires NO ELECTRICITY
and are 100% FACTORY ASSEMBLED
Instructions:
Portable Go Anwhere Misting Systems
- Fill water tank with clean drinking water.
- Place pressurized water tank at any corner of
canopy.
- Attach tubing with Velcro Pieces every 4-6 feet
to interior, lower frame of canopy.
- Pressurize water tank by releasing handle. Pump
handle assembly up and down into tank until you
feel moderate resistance. Lock handle back in
locking position. (Repeat as necessary).
- Position misting nozzles towards the ground
(this will reduce or eliminate water build up
in the frame work which can create an ongoing
drip.) Open ball valve, enjoy the cool mist.
- Always remove entire misting system from canopy
prior to disassembly or fold-up.
